What are the precautions for using the shoe-specific TPU hot melt adhesive film?
Mar 23, 2026
Storage Requirements ：Keep in cool, dry and ventilated place (15-30℃), stay away from heat, fire and direct sunlight; seal unused film to avoid moisture and dust, do not stack heavily to prevent deformation.
Surface Preparation ：Clean the bonding surface thoroughly, remove oil, dust, sweat and release agent; keep surface dry to ensure strong adhesion.
Hot Press Control ：Control temperature (90-130℃), pressure and time (10-30s) reasonably; avoid insufficient adhesion due to low temp, or glue overflow/fabric damage due to high temp.
Post-operation Care ：Cool naturally to room temperature after hot pressing, do not bend or pull the bonded part forcibly; avoid contact with strong chemical solvents for finished shoes.
Compatibility Test ：Conduct pre-test on flannel, glossy leather and other sensitive fabrics; not suitable for Teflon, silicone-coated hard-to-bond materials.
Store in cool, dry (15-30℃) environment, keep away from heat and direct sunlight
Clean bonding surface before lamination, avoid dust and oil to ensure firm adhesion
Control hot press parameters (temp: 90-130℃, time: 10-30s) to prevent overflow or damage
Conduct pre-test for sensitive fabrics, avoid using on non-stick coated materials
